Assembly
NOTE: If you have already mounted/soldered your PC mounted pots, ignore the parts of the
assembly portion of the instructions. This is only for kits that have solder lug pots.
1. Install the jacks first. If you are looking down inside the enclosure, the mono jack goes on
the right side and the stereo jack goes on the left. Place the washer on the outside of the
enclosure. Use a 1/2" wrench to tighten.
2. Install the AC adaptor jack. The bolt goes on the inside. Use a 3/4" or 14mm wrench to
tighten. You may think your AC adaptor jack is missing the nut, but it is not. It justs blends
in very well. The hex portion of the jack is the nut. Turn it counter clock wise with a pair
of pliers and you can be assured it will come off.
