Camera will speak a prompt tone “Waiting to connect”.
After 20-30 seconds it will connect well. You can view the real time video now.
Notes:
1. Be patient to click Next when hear prompt tone, otherwise would cause
fail to connect;
2.If can not connect, click the Reset button 3 seconds until hear “Reset Successful”.
Then repeat the above steps. Or take out the power for a while, connect again. The
camera will auto turn pan or tilt. Then click Reset and repeat above steps.
For Wired connection
1)
Connect the device’s internet access to the router’s LAN port using cable.
2)
Click Next then add the “device list”. Make one name for your device. The default
device password is generally on the label at the bottom or back of the device.
3)
Usually its default password is 123456. Finally click Save.
For AP connection
1)
Power on, and the device is waiting to connect
2)
Input your local wifi name and password, creating a visiting password.
3)
Phone search the wifi “GW_IPC_*******” that emit by camera, which default
password is “12345678”. Open the Yoosee you can preview the video.
