BYD AUTO S6, S6A, S6K Owner's Manual
Instruments and Indicator Lights 1-48
Speedometer
The speedometer displays the car
speed in km/h.
Outdoor Temperature Display
Pressing gear ON on the start button;
the instrument will display the present
outdoor temperature at °C accurately.
Mileage Information Display
Mileage information display content
includes the total mileage, mileage 1
and mileage 2.
Total mileage: the total accumulated
mileage of your car.
Mileage 1/Mileage 2: the mileage
calculated after the last reset. Mileage 1
and mileage 2 are independent of
each other, so there will be two kinds
of travel records.
By pressing the travel reset button for
a short time repeatedly, information of
the total mileage, Mileage 1 and
Mileage 2 can be displayed in turn.
When the power is at gear ON, the
selection at the last power-off is
displayed.
Resetting operation: first select
Mileage 1 or Mileage 2 to be reset,
and then press & hold the travel reset
button until the displayed value is "0.0
km".
Gear Display (optional)
Displays the current gear.
Tachometer
The tachometer indicates the rotation
speed in rpm (revolutions per minute).
It is used to select the correct moment
for gear shifting during driving.
Driving at high engine speeds will lead
to excessive wear of the engine and
higher fuel consumption.
WARNING
Do not allow the needle to enter the
red area, which indicates danger to
the engine and may result in severe
damage.
Coolant Thermometer
By shifting the start button on the gear
ON, the thermometer displays the
temperature of the engine cooling fluid.
During normal operation, the needle
should ascend from the bottom mark
to the middle.
Under adverse driving conditions, e.g.
hot seasons, long uphill driving or
high-speed driving, the engine may
overheat.
If the needle of the coolant
thermometer moves to the red area,
the cooling fluid temperature icon
will turn red, and the right-hand
information display will show"
Over-high temperature of cooling
fluid" at the same time, which means
