BYD MINI ES Battery Base, Руководство по установке

Страница: 22 / 50

22
4.1.1 Safety introduction
Installing and commissioning the storage system requires training, and only qualiied
installers can carry out the installation, wiring and commissioning.
WARNING!
Risk of injury from failing to follow the correct sequence
If the speciied sequence is not followed during installation, it may cause injury or
damage to the unit.
- Consult the speciied order.
- Consult the safety instructions.
Risk of injury due to sharp edges
The components have sharp edges which can cause injuries if not handled correctly.
- Wear protective gloves.
- Mount the components with 2 people.
Risk of injury due to heavy weight
The heavy weight of the components may cause injury during installation, disassembly and
transportation.
- Transport and mount the components with 2 people.
DANGER!
Risk of shock
•
The batteries have a high short-circuit current which causes a shock, that could lead to
serious injury or death if touch it improperly. The exterior cable also has a risk of shock
and accidental touching could also lead to serious injury or death.
•
Don’t wear watches, rings and other metal accessories when you are working. Only use
the tool with non-conductive handle
•
Don’t set or store tools or anything metal on the batteries.
•
When you connect the exterior cables, please conirm that the power is off. Check the
exterior cable.
4.2 Conirm installation location
•
Refer to this manual section 2.3 “Conirm installation location”, to select proper
installation location
•
After conirming the location, please disconnect the power supply of the circuit and make
sure the circuits of the room are neutral, then installation can begin.