BYD EPS14, Руководство по обслуживанию, Страница: 52 / 60

ELECTRIC MAINTENANCE
SERVICE MANUAL 48
3
2
1
4
CAN USB
Code Name Code Name
1 Computer 3 Dataline From Can Box To Diagnostic Interface
2 Can Box With The Dataline 4 Interface
Program Downloading Procedure
(1) Use the dataline to connect the computer to the truck.
(2) Run the software "ZpCanFlasher", click "File" in the menu bar, choose "Load ConfigFlash" to load the file named "adx_
zp002(2560).cfi".
(3) Click "Config Can" in the menu bar, show the window named "Select Device", choose "lxxat", confirm, show the
"Configuration Can" and set values according to the picture, and then choose "USE IXXAT CONFIGURATION".
(4) Click "File" in the menu bar, choose "Load File" to load the file named "adxt2b_2bd008.H86".
(5) Turn on the truck to run the main controller. Click "Connection" in the menu bar and choose "start" and wait for
"CONNECTED" being shown.
(6) Click "Clear" in the menu bar, the status textbox shows "Cleared", which means that the previous program download in the
main controller has been deleted, and then click "Flash" in the menu bar to download the program.
(7) After downloading, click "Connection" in the menu bar, choose "Stop" to disconnect the communication, and then turn off
the truck.