BYD EPS14, Руководство по обслуживанию, Страница: 16 / 60

CHASSIS MAINTENANCE
SERVICE MANUAL 12
11
12
13
12
Code Name QTY Information Code Name QTY Information
11 Oil Filler Plug 1 30 N-m 13 Oil Drain Plug 1 30 N-m
12 Seal 2
Caution
(2) Oil drain time of approximate 5 minutes must not be exceeded.
(3) When filling the oil, care about the condition around to prevent dust and water entering the gear box.
(4) When disposing the waste oil, keep children away and do not pour it into the sewer or onto the ground.
(5) The correct oil level and the correct oil quantity is achieved when the oil level is at the lower edge of the oil filler plug
Drive Axle and Motor Assembly Removal and Installation
1. Removal
(1) Before removal, remove the cover.
(2) Remove the tiller head and arm assembly.
(3) Disconnect cables(high and low voltage cables).
(4) Remove the fasteners of the drive axle and motor assembly, hoist the truck frame, and then separate them.
(5) Put the drive axle and motor assembly on the flat floor or sturdy pallets.