8
Set Preset
Microphone ID:
Delegate microphone: 001-999
Chairman microphone: *01-*10
Camera ID:
One main control unit is able to control 16 cameras. 01-16 represents the ID of the 16 cameras.
Preset point:
Each BXB’s high speed dome camera possesses 128 preset points. When the LCD screen shows ID number 001, it indicates
the first preset point of the camera. When it shows “OFF”, the preset point is not used.
After all preset points have set, press “ENTER” to save the current setting. The LCD screen will show the message “SAVE”.
※
Notice: Remember to press
“
ENTER
”
to save the current setting before going back to the main menu, or the setting will
be void.
Go Preset
Select the camera’s ID and press “ENTER” button first and then choose the microphone’s ID and press “ENTER” again, the
camera’s lens will go to the position of the selected microphone.
This function is to verify if the setting of microphone’s preset point is correct as well as check if the connection between
main control unit and camera is usual. If the connection is failed, the message, “dome does not exist” or “timeout” will be
shown.
Volume Set
◎
System: 20 / 50
◎
Aux In: 20 / 50
◎
Mic In: 20 / 50
Press Left/Right button to adjust the volume. The maximum volume can reach 50.
Mic Checking
Test
: the system is able to detect the microphones that leave the testing record before as well as to show the ID of any
abnormal microphone.
Scan
: the system is able to scan all microphones from the four ports of main control unit automatically. Also, the
microphone quantity of each port is able to be shown on the LCD screen.
Mic ID Set
Press Up/Down button to select the ID number.
While microphone’s ID is being set, the ring on the microphones flashes simultaneously.
The light on “Talk” button is on
the microphone’s ID can be set; press “Talk” button again to confirm the setting.
The light on “Talk” button is flashing
reminder of setting double ID
Press “ESC” button after all settings are done.
