7
Speed Dome Set
Dome Mode
Press Left/Right to select a mode. There are three dome modes:
Off
: Not operating image tracking
Button:
Camera tracks the image when a speaker presses “TALK” button on the microphone. If more than one speakers
press “TALK” button, the camera taking will stay at the last speaker who finishes talking. Other speakers should press “TALK”
button again to make the camera track their images back.
Sound
: In this mode, the main control unit can automatically detect the position of the speaker who is talking and then
transmit the signal to the camera to do image-tracking.
Video Switch (Video SW)
Press Left/Right button to turn on/off the function of video override.
To operate video override, BXB’s multi-screen video splitter should be equipped to control multiple cameras and output the
images.
Go Back to Home Point (Dome HGO)
Press Left/Right button to turn on/off the function for going back to the home preset point.
When there is no one speaking in the conference, turning on this function will make the camera take the image of the
preset home point automatically ({DOME} and {ADR} can be set as {HOME} ).
Mic Position
Total of 16 cameras can be operated simultaneously to track the image of each microphone unit. Each camera has 128
preset points.
After the main control unit has connected to a camera successfully, select the camera’s ID shown on the LCD screen. If the
connection is failed, the screen will show the message, “dome does not exist” or “timeout”. To set the preset point of
microphones, just select the microphone’s ID and press “ENTER” button. After that, press
▲
(UP),
▼
(DOWN),
◀
(LEFT),
and
▶
(RIGHT) buttons to control the direction of camera’s lens to catch microphone’ s positions. Just press “ENTER” again
to save the current setting.
※
Only BXB’s camera can be controlled by the main control unit. To use other brands’ cameras such as Sony and Panasonic,
BXB-C901 Camera Control Unit should be equipped.
