BWT Pool'N Box Junior, Инструкция по установке и эксплуатации

Страница: 4 / 36

4/36
2021/03 - Version: B Code : 37371
HOTLINE
WOODEN POOLS BWT myPOOL POOL’N BOX
1. FOREWORD
Once you have built your pool, keep the documentation (installation instructions, invoice, etc). You will
need these for any future exchanges with our various services.
Great care has gone into the manufacture of your pool, however, some precautions are necessary for its
correct assembly and use. We strongly recommend that you read the installation instructions carefully
before beginning assembly of the pool, and that you keep them for future reference concerning the use
and maintenance of the pool.
In the event of any claim, you will need to quote the pool’s tracking number that you will find at the end of
this document.
1.1 Presentation
POOL’N BOX JUNIOR pools are innovative: they associate the attributes usually associated with large, top
of the range pools with the practical advantages of more modestly sized pools. With its smaller footprint,
this pool can be installed wherever you would like.
With a water surface area of less than 10 m2, everything finds its place with POOL’N BOX JUNIOR.
1.2 Storage
If you do not intend to assemble your pool immediately, do not unpack the components, store the boxes
in a suitable, well ventilated, cool area protected from the sun and bad weather. The purpose is to avoid
deformation of the wooden elements that would make assembly more difficult.
Deformation of the wood could only be caused by storing the wood other than as recommended. If you had
to unpack your pool, you must repack and restrap the pallet of wooden elements.
Once the wooden elements are unpacked, proceed with assembly within the next 24 to 48 hours. While
storing the boxes, we recommend that you remove the film and insert wooden wedges between each layer
of wood to facilitate the circulation of air.
1.3 Safety
Your electrical installation must comply with the standard in effect in the country of installation (C15-100 in
France). Notably, the electrical supply of the pump should be protected by a 30mA residual current device.
Do not hesitate to have this work carried out by a professional to ensure the compliance of your installation.
Children should only use the pool under the supervision of an adult. This pool is intended for private use only.
Installation of the pool beneath trees is not advised, installation beneath electrical wires is strictly prohibited.
Remember to remove the wooden access ladder after each use to prevent unsupervised access to the
pool.
We recommend that access to the pool be secured by one of the means of protection set out in the
standards NF P 90-306,307,308,309 that is: safety barrier, alarm, safety cover, shelter.
1.4 Assembly
1.4.1 Assembly steps (above ground only)
• excavation
• assemble the supporting braces
• pour the concrete slab
• assemble the wooden structure
• install the filtration system and pool fittings
• lay the waterproofing membrane
• install the coping and finishing trim
• wiring