DE
DE
7
6
1�7
Product-specific warnings
In the following sections, you will find product-spe
-
cific warnings whenever you must perform certain
safety-relevant actions on the device.
DANGER!
Electrical hazard!
Contact with live components will
cause electric shock!
►
Unplug device before any service and
repair works.
►
Turn the main switch OFF and secure it
against being switched on again.
Bewades 80W80/11 LC and
Bewades 100W100/11 LC
DANGER!
Risk of injury!
The emitter protection tube is forced
upwards by the water pressure.
►
Never pressurize unit unless the upper
emitter protection tube lock (5) is in place.
If this is not the case the emitter protection
tube is forced upwards by the water pressure.
WARNING!
Ultraviolet rays!
Burn hazard for eyes and skin!
►
Only start up the unit with the protective
cap (8) on.
►
Never look into the open sensor socket
whithout integrated glow plug or sensor.
►
Wear personal protective equipment
(protective goggles).
WARNING!
Hot surface!
Burn hazard!
►
If the flow of water stagnates, the surface
temperature can reach temperatures of up
to 60 °C
►
Note on changing the emitters! After you
switch off the unit, allow the water to flow for
approximately 5 minutes to cool the emitters.
NOTICE
Product damage!
Damage to the product due to the
lamp burning for too short a time!
►
The minimum burn time before switching
off the heater should not be less than 5
minutes.
5
8
