DE
DE
17
16
►Insert and connect a new emitter. Ensure that the
plug is inserted properly (7).
►Attach the blue protective cap (8) and secure it
with the screws.
►Open shut-off valves up- and downstream of
the unit.
The unit is now ready for use.
9
Operator responsibilities
You have purchased a product that is durable and
easy to service. However, all technical equipment
requires regular servicing in order to guarantee
optimal functionality.
Keep yourself up to date with regard to the quality
and pressure ratio of the water which is to be trea
-
ted. If the water quality changes, the settings may
need to be changed. Consult a specialist if this is
the case.
The prerequisite for proper function and the warran
-
ty are a regular inspection by the operator (every
2 months) and routine maintenance (EN 806-5)
by the BWT after-sales service staff or an installer
authorised by BWT to carry out maintenance (every
6 months).
Wearing parts must also be replaced within the
prescribed maintenance intervals in order to ensure
functionality and fulfil the warranty conditions.
9�1
Inspection
The operator must carry out the following inspec-
tions regularly:
●
Check the nitrite content
for max. stagnation
time in operation
●
Check emitter casing tube
for scratches while
cleaning; replace as required
●
Check that the blue cap
is firmly in place during
each cleaning
●
Replace the O-rings
in the drain valve and in the
bleed screws if they show signs of wear
1
3
4
6
7
8
2
9
Bewades 70W70/08LC, 200W200/11LC,
400W200/17LC
