3. Duo/TP PCI Bus Configuration
!
PCI Slot is auto-configured by the system BIOS
!
When installing multiple PCI Duo/TP boards at the server station, you should configure the PCI
slot's IRQ settings correctly. Up to four PCI Duo/TP can be installed in a PCI file server running
NetWare system. Each Duo/TP board's IRQ should not conflict with other installed
boards/devices.
4. Boot ROM Installation
To add the Remote Boot feature to a workstation, insert the Boot ROM into socket as show below.
Align the notch and pins on the Boot ROM with the notch and pin receptacles on the ROM socket.
Gently push the Boot ROM into the socket, being careful not to bend the pins.
PCI Duo/TP Boot ROM is auto-configured with PCI slot after your PC is initialized. The message is:
RPL-ROM-ADR
: 0040-C7xx-xxxx (Node ID)
RPL-ROM-IRQ
: x (PCI slot IRQ no.)
RPL-ROM-PIO
: x000 (PCI slot IO address)
ADR is the Ethernet Node Address of PCI Duo/TP IRQ, PIO of PCI slot are configured by your system
PCI BIOS