BW Technologies Rig Rat III, Руководство пользователя

Страница: 32 / 36

Rig Rat III Controller
User Manual
Troubleshooting
If you encounter a problem, follow the solutions listed in the table below. If you still are unable to correct the problem, contact
BW Technologies (page 2).
Table 8. Troubleshooting Tips
Problem Possible Cause Solution
→
Detector is off.
→
Turn on detector.
→
Detector XMTR is disabled.
→
Enable detector XMTR.
→
Antenna is not aligned.
→
Move the antenna.
→
RF signal from detector is too weak.
→
Move or replace the antenna.
→
Replace the antenna cable with low
loss cable (LMR 400). See
Replacement Parts and
Accessories .
rF Out
→
Transceiver channel is incorrect.
→
Match the detector’s transceiver
channel to the controller’s
transceiver channel.
Signal is intermittent
→
Outside Interference.
→
Ensure all other radio equipment is
grounded (i.e., the detectors).
24