BW Technologies Rig Rat III, Руководство пользователя

Страница: 19 / 36

Rig Rat III Controller
Installation
Note
Atmospheric conditions may cause signal loss.
Antenna Installation
The controller is equipped with a TNC antenna port. Install
the antenna and any extension cables required. For
transmission distances see
Specifications and any
applicable accessory manuals.
Antenna cable runs should be kept short (less than 20 ft/
6 m). If the distance is greater, use a cable such as the
LMR 400. See the section
Replacement Parts and
Accessories .
The use of connectors should be minimized.
Controller Location
When selecting a location to install the controller, do not
place it where it can be exposed to electrical shock and/or
severe mechanical shock.
Controller Installation
The controller should be powered by a minimum 3 conductor
AWG 18 wire with a flexible cord suitable for area use
depending on the local regulatory requirements.
The controller is equipped with pre-drilled mounting flanges
for permanent installation.
Figure 4. Controller Dimensions
11