BVM®2016
6
09/14/2016
Fuel System
U.A.T.
Use a Perma-Grit pancake rotary cutter to
make a semi-circular notch in the UAT
mount.
UAT is positioned in the opening as
shown. In the final install it will need a thin
pad of foam below it to protect the servo
extension wires that are located
underneath. Also, a restraining strap is
installed to keep the UAT in place. See
later in manual.
Apply a piece of fuzzy adhesive backed
Velcro as shown to protect the servo
extension wires below.
