BVItech BV-48, Инструкция по эксплуатации

Страница: 13 / 16

BV - 48 EN 13
• TO USE MODE FUNCTION
Simply press [ MODE ] (5) to change the mode as bellows:
Clock Mode → Radio Mode → Nature Sounds Mode → Return to Clock Mode
• TO LISTEN TO THE RADIO
For better reception, fully extend and adjust the position of the FM antenna
wire.
1. Press [ MODE ] (5) once to turn on the radio, the clock display will show
the FM radio frequency in MHz;
2. Press
▲
or
▼
to tune the radio to a desired station. Press and hold
▲
or
▼
for few seconds to start scan for the next strong station;
3. To stop the radio function, press [ MODE ] (5) for 2 second;
4. To adjust the volume, press VOLUME (8) once, the display shows
“L07” , press
▲
or
▼
to adjust volume from L01 (minimum) to L15 (maxi-
mum);
Remark: keep your radio away from fluorescent lamps or other electronic
devices, which may cause interference to the radio.
• TO LISTEN TO NATURE SONDS
1. Press [ MODE ] (5) twice, the display shows:
(birds) or (forest), or
(beach/water front), or
(rain and storm);
2. When nature sound is being played, press VOLUME (8), once
press
▲
or
▼
to adjust the sound volume:
- Low volume (default),
- Medium volume;
- High volume.
• TO USE THE AUX FUNCTION TO PLAY MUSUC FROM YOUR DEVICE
You could play the music in your smartphone or MP3 device on this unit
by using AUX function.
1. Press [ MODE ] (5) to activate turn on the radio or nature sounds;
2. Plug in the AUX cable (included in giftbox pack) to the AUX Line-in
socket (14) at the back of your Wake-Up-Light Radio and one end to the
earphone socket of your device;
3. Turn on your device to play the music you like. Adjust the volume on your
device. Please note that you cannot adjust music volume on your unit;
4. To stop playing music, unplug the AUX cable.
Note: You could stop playing the radio, the nature sound or your music
anytime by pressing and holding MODE for 2 seconds.
• TO SET THE NAP TIMER
The NAP Timer allows you to rest and automatically wake up in 5, 15,
30, 45, 60, 75, 90 or 120 minutes.
1. Press
▲
/NAP once, the display shows the nap icon and the default
naptime “05” (5 minutes);
2. Press
▲
/NAP
again to select your desired naptime. It will exit to time
display if no button pressed for 5 seconds;
3. The nap icon lights up (pic. 2) when the nap timer is counting. When the
nap timer reaches 0, the alarm will sound and the nap icon will flash. Press
▲
/NAP once to stop the nap alarm , the nap icon will go off.
Note: if the nap time is set up then your alarm is sounding, your nap time will
be cancelled automatically.
• TO USE THE MEMORY SET (RADIO PRESET) FUNCTION
This clock radio features a total of 10 preset memories of FM stations.
These allow you to preset your favorite stations and access them quickly.
1. Turn on the radio and select a radio station you like to memorize;
2. Press and hold the
SET/MEM
(2) for 2 seconds until “
C01
” appear and
“01” flashes;
3. Not press SET/MEM (2) to keep «01» or single press to select «02» or
repeatedly press for another memory, then press and hold SET/MEM (2)
before icon becomes atatic to store Memory 01, 02 or another;
4. Repeat Step 2 to 3 to preset memories 1 through 10.
Pic.3