BVItech BV-48, Инструкция по эксплуатации

Страница: 12 / 16

BV- 48
EN 12
4. Then press SET/MEM (2) again, the clock display shows
and “
OFF ”
flashes. Then press
▲
or
▼
to set minutes before your set alarm time:
15 : turns light on and brighter gently 15;
30 : turns light on and brighter gently 30;
OFF : turn off the Wake-Up-Light feature ;
5. Press SET/MEM (2) again (or if no key is pressed within 8 seconds) to
return to normal time display (look at pic.2).
Note: when 12-hour time format is selected, the icon will appear on
the lower middle time display to indicate the afternoon time; there is no
AM indicator.
• TO SET THE DAILY ALARM 1&2
1. Press
ALM 1-2
(10) button once, the LED display shows «
A1
» and
“ 0:00 ” are flashes;
2. Press
▲
or
▼
to set your desired alarm 1 time. Press and hold
▲
or
▼
will accelerate setting in faster speed;
3. Press SET/MEM (2) once, it will shows «OFF»;
4. Press
SET/MEM
(2) once more to select which alarm type you would
like to wake up with:
- Wake-by-Buzzer (« bu » icon appears);
- Wake-by-Radio ( « rd » icon appears);
- Wake-by-nature sounds (icon appears with , , or
instead the time digits):
: birds : forest
: beach / water front : rain and storm
5. It will return to normal time display, if no key is pressed in 8 seconds;
6. Press
ALM 1.2
(10) then press
SET/MEM
5 times, «OFF» appear, the
alarm is completely turned off;
7. Press ALM 1.2 again, the LED display shows «
A2
» and “ 0:00 ” are
flashes. You could do alarm 2 settings by repeating Step 2 to Step 5 above;
8. When the alarm is sounding, press the ALM 1.2 to stop the alarm sound
and automatically reset it to come on the following day.
• TO USE THE SNOOZE ALARM
1. When alarm is sounding, touch the
SNOOZE/LIGHT
(6) once,
the alarm will be silenced and come on again according to the set snooze
duration;
2. If the SNOOZE/LIGHT (6) is not touched during the alarm is
sounding, the alarm will last for 3 minutes and then turns off automatically.
The alarm will stop temporarily according to the set snooze duration (5-
60 minutes) and then sound again. This automatic snooze function will
last for 1 hour.
• TO USE THE WHITE LED OR THE COLOR CHANGING MOOD LIGHT
1. Simply tap on the top SNOOZE/LIGHT (6) of your unit to turn
on the white LED light. The display shows «10» , which is the default
brightness of the white LED light. You could press
▲
or
▼
to increase or
reduce the brightness Level from 0 (lowest) to 15 (highest);
2. Touch the top
SNOOZE/LIGHT
(6) again to turn on the color
changing mood light. The display shows ;
3. Touch the top
SNOOZE/LIGHT
(6) again to fix a color of your
mood light. The display shows ;
4. Touch the top
SNOOZE/LIGHT
(6) again to turn off all the light
function.
Note: The LED display will return to time display in 8 seconds if there is no
further press of any button.
• TO USE THE HI-LO DIMMER CONTROLL
Simply press DIMMER (3) once to select Hi-Lo brightness of the
LED display (3 levels).
Pic.2