SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read and understand the information contained within. The owner and operator
shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions
and safety information shall be conveyed in operator’s native language before use of this product is authorized. Make
certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from
service immediately.
Inspect before each use.
It is recommended that, prior to each use, an inspection be done by qualified personnel and
that any missing or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement
parts only. Any pump that appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed
from service immediately until such time as repairs can be made. Owners and operators of this equipment shall be aware
that the use and subsequent repair of this equipment may require special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. These pumps
(Except P1201S) have a unique two-stage hydraulic circuit which allows quick displacement of hydraulic fluid under no
load conditions and easy pumping in loaded conditions. These lever operated pumps supply compressed hydraulic fluid
to compatible applications i.e. rams, presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI
of fluid pressure is needed. Special skill, knowledge and training may be required for a specific task and the product may
not be suitable for all the jobs described above. Unsuitable applications would include applications that call for a device
to move, level or support persons, animals, hazardous materials, mobile homes/dwellings in general, mirrors and/or plate
glass, and/or to connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the decision
regarding suitability of the product for any given task and assume the responsibility of safety for himself/herself and others
in the work area.
WARNING: Always check connections before using. Alteration of these products is strictly prohibited. Use only
those adapters and attachments provided and approved by the manufacturer
.
WARNING
:
To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of
each pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump
!
!
Figure 2 - Models P2301 & P4301 Components
Release Valve
Reservoir
Vent Screw
Handle
Carrying
Handle
Oil Outlet Port
(3/8” -18NPTF)
Reservoir
Shipping/ Vent Plug
Handle
Release
Valve
Oil Outlet Port
(3/8” -18NPTF)
Figure 3 - Model P2301M, P4301M Components
Vent Screw
Reservoir
4-way
Control Valve
Control Valve Lever
Handle
Carrying Handle
Oil Ports
(3/8” -18NPTF)
2
Figure 1 - Model P1201 & P1201S Components
