6
5] Controls
EQ Band Controls
FREQUENCY
– each band has a 12 position frequency control which sets
the centre frequency of the filter. The two mid bands have two ranges of
frequency, and the blue lettering applies when the
FREQ x2.5
switch is
illuminated.
Please note
that if the
FREQUENCY
switch is parked between
clicks (or detents) the
ON
and
FREQ x2.5
pushbuttons will not function.
BANDWIDTH
(low mid and high mid) – a 12 position switch to set the width of
the bell filters ranging from 2 octaves to 0.25 octaves wide. See the graphs
at the end of this manual for more detail.
BANDWIDTH/SLOPE
(low and high bands) – the low and high bands can be
switched into shelf mode (
BELL/SHELF
switch illuminated), and the bandwidth
control reverts to a shelf slope control in this mode. Position 2 is a steep
slope whilst position 13 is a more gentle curve. See the graphs at the end
of this manual for more detail.
