Buyang FA-D300, Руководство пользователя

Страница: 97 / 107

Cleaning
—Clean the ATV thoroughly.
Fuel
—Turn the fuel valve to “OFF” and drain the carburetor bowl completely.
Oil Add and Filter Change
—Warm the engine and change oil and filter.
Air Filter/Air Box
—Inspect and clean or replace the pre-cleaner and air filter. Clean
the air box and drain the sediment tube.
Inspect All Fluid Levels
—Inspect the following fluid levels and change if necessary:
transmission, brake fluid (change every two years or as required if fluid looks dark or
contaminated).
Fog the Engine
—Spray light oil into the cylinder through the spark plug hole.
Check and Lubricate Cables/Grease
—Inspect all cables and lubricate.
Battery Maintenance
—Remove the battery and add distilled water as required to the
proper level. Do not use tap water which may contain minerals that reduce battery life.
Apply dielectric Grease to the terminal bolts and terminals. Charge the battery.
Storage Area/Covers
—Set tire pressure and safely support the ATV with the tires
1-2” (25-50 mm) off the ground. Be sure the storage area is well ventilated. Cover the
machine with an ATV cover.
NOTE:
Do not use plastic or coated materials. They do not allow enough ventilation
to prevent condensation, and may promote corrosion and oxidation.
Transporting
Whenever the ATV is to be transported, the following measures should be taken.
1. Turn off the engine and remove the key.
2. Turn the fuel valve to off.
3. Be certain the fuel cap, oil cap, and seat are installed correctly.
4. Always tie the frame of the ATV to the transporting until securely using suitable
straps or rope.
5. Always place the transmission in gear and lock the parking brake.
Create PDF with GO2PDF for free, if you wish to remove this line, click here to buy Virtual PDF Printer