Buyang FA-D300, Руководство пользователя

Страница: 88 / 107

Front Gear Case Oil
Always check and change the front gear case oil at the intervals outlined in “16.
Maintenance”. Maintain the oil level even with the bottom of the fill hole threads (1).
The correct gear case lubricant to use is SAE 15W/40SG. Use of other oils may result
in improper operation of components.
Oil Check
1. Position the vehicle on a level surface.
2. Remove the fill plug (2) and view the
oil level.
1. Add the recommended gear case oil as
needed to bring the level to the bottom
of the fill hole threads.
4. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm).
Oil Change
1. Position the vehicle on a level surface and
remove the fill plug.
2. Place a drain pan beneath the gear case,
remove the gear case drain plug (3) located
on the bottom right-hand side, and drain the oil.
3. Clean and reinstall the drain plug. Torque to
14 ft. lbs. (19 Nm).
4. Add 6 ounces (200 ml) of SAE 15W/40SG..
5. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm).
6. Check for leaks.
Create PDF with GO2PDF for free, if you wish to remove this line, click here to buy Virtual PDF Printer