6 EN
7 EN
TWS pairing
1
Remove both headphones from the base and they automatically
turn on. Wait for 10 seconds and the headphones switch into
automatic pairing mode. After a few seconds, the headphones are
interconnected and the right headphone indicator light will flash
alternately red and blue. Then enter the Bluetooth menu of your
phone and start the device search.
2
When the headphones are turned off, press the MFB button
for 2 seconds to turn the headphones on. Wait 10 seconds and
the headphones switch into the automatic pairing mode. After
a few seconds, the headphones are interconnected and the right
headphone indicator light will flash alternately red and blue. Then
enter the Bluetooth menu of your phone and search for “REI-TW 100
mk2”.
Perform as described above:
1
or
2
. Once the TWS pairing has been
successfully completed: the left headphone announces “left channel”
and the right headphone announces “right channel-pairing”.
Your phone starts searching for the Bluetooth device (follow the
instructions in your phone's manual) and select a device called
“REI-TW 100 mk2”.
Warning:
Make sure that the volume of your BT device is minimized
before pairing your headphones to prevent a possible
damage to the headphones.
Note:
Always follow procedure first to connect the headphones to
each other and only then begin the pairing process with the
mobile phone. If you have proceeded correctly, you will see in
the mobile phone menu of the Bluetooth pairing one device
“REI-TW 100 mk2”. If you proceeded incorrectly, two “REI-TW
100 mk2” devices will appear in the menu, in which case the
phone calls can not be received properly.
TWS re-pairing
Method nr. 1:
Press and hold the MFB button on the left or right
headphone for about 2 seconds to turn the headphones on. Wait
a few seconds. The headphones will interconnect automatically. The
right headphone will pair with the mobile phone that has already been
connected a moment ago. Pairing was successful.
Method nr. 2:
Remove the headphones from the base, they turn on
automatically. Wait a few seconds. The headphones automatically
connect (this is indicated by flashing blue light on both headphones).
The right headphone pairs automatically with the mobile phone to
which it was connected before. Pairing was successful.
Note:
Headphones (right and left) announce “connected”. Left
headphone announces “left channel” and right headphone
announces “right channel”. Once the pairing with the mobile
phone was successfully done, the right headphone announces
“second device connected”.
Accept/End Call
If you hear incoming call, press briefly the MFB button of the left or
right headphone to accept the call. One beep sounds. Press the MFB
button of the left or right headphone for 2 seconds to end the call. The
beep sounds twice.
Rejecting a call
Press and hold the left or right headphone MFB button for 2 seconds
when the phone is ringing. The beep sounds twice and the “call
reject” alert sounds.
Voice dialling
In standby mode or during music playback, press the MFB left
headphone twice and one beep sounds. (This function is available
only if supported by a connected mobile phone.)
Managing two calls
(This function is available only if supported by a connected mobile
phone.)
If you receive another incoming call during a call:
1. Press and hold the right headphone MFB button for 2 seconds to
end the existing call and answer the new incoming call.
2. Press briefly the right headphone button to hold the current call
and answer the new incoming call.
3. When the second call is accepted, press the right headphone MFB
button twice to switch between the calls.
4. When the second call is answered, press and hold the right
headphone MFB button for 2 seconds to end an existing call
and press and hold the right headphone MFB button for about
2 seconds to end the second call.
Note:
The above mentioned procedure is only possible provided that
the connected mobile phone supports Bluetooth version V1.5 or
higher and the phone supports multi-call management.
Music playback
Press the right headphone MFB button briefly in standby mode to start
music playback.
When the music plays double press the right headphone MFB button
to pause the playback.
BUXTON REI-TW 100 mk2 EN_CZ_SK_PL_HU_RS_HR_EL.indd 7
BUXTON REI-TW 100 mk2 EN_CZ_SK_PL_HU_RS_HR_EL.indd 7
14. 11. 2019 17:04:45
14. 11. 2019 17:04:45
