Butts of Bawtry SP80WB, Инструкция по эксплуатации

Страница: 9 / 11

9
need to do the following steps. (1) Release two bolts M5x10 on clamp as shown. (2). Push the
handle to the top position, use your hand to adjust the adjustable plate so as to make sure the
hole at the bottom of hopper can be closed completely. (3). Push the handle to the lowest
position, use your hand to adjust the adjustable plate so as to make sure the hole at the bottom
of hopper can be opened completely. (4). And then tighten the bolts and nuts on clamp again.
To operate this spreader, push the handle to the lowest position (downwards). You may
move the position of Wing nut on the Gauge & Lever to adjust the space on the hole
between the hopper and the adjustable plate as per your need when spreading.
PARTS DRAWING