Büttner Elektronik Batterie-Computer MT iQ BasicPro, Инструкция по эксплуатации

Страница: 28 / 36

28
EN
BÜTTNER ELEKTRONIK – MT iQ Basic
Pro
Settings
Your battery computer is equipped with a so-called remai-
ning time. This gives you reliable information about how
long the battery capacity is still sufficient to operate your
consumers. For this purpose, the MT iQ Basic
Pro
determines
the current consumption and sets this in relation to the
remaining capacity. For the correct calculation, it is
necessary to set the battery type and the nominal capacity
of the battery properly.
Pressing push-button
u
for 5 seconds will enter the setup
menu.
First, please set the battery type. To do this, activate the
setup menu as described above. The field “Back” is high-
lighted in black. Press the push-button u to scroll through
the menu until “BatTyp” appears in black and then again
press push-button u for 5 seconds. The display jumps to
battery type on the right side (factory default Pb). Briefly
press push-button u there repeatedly until your installed
battery type is displayed.
Pb = lead-acid battery
Gel = gel battery
AGM = AGM battery
LiFePO
4
= lithium battery
Now release push-button
u
and wait about 10 seconds.
The battery type setting now is done and stored erratically.