Büttner Elektronik Batterie-Computer MT iQ BasicPro, Инструкция по эксплуатации

Страница: 26 / 36

26
EN
BÜTTNER ELEKTRONIK – MT iQ Basic
Pro
Now plug the current sensor in the connector of the exten-
sion cord unti l it snaps in audibly.
Please connect now the two cables at the end of the exten-
sion cord with the batt ery’s positi ve pole (red cable) and its
negati ve pole (blue cable).
Reconnect the pole terminal with the batt ery post.
Thereaft er plug the other end of the communicati on cable
in the according socket on the back of the batt ery computer.
Note
Extension Cord
Should the length of the connecti on cable included
in the delivery be insuffi cient, you can extend it
further by ordering MT01217 extension cord for
the basic batt ery computer.
Aft er installati on, check the correct installati on
positi on of the sensor. Switch on several consumers
(with charger turned off ). On the display, the
fl owing current value must be indicated with a
negati ve sign. If this is not the case, please turn the
current sensor accordingly.
i
i