Butterfly B1501B/T, Руководство по эксплуатации и обслуживанию

Страница: 19 / 94

P a g e | 19
Butterfly B1501B/T - Single Head 15 Needle Embroidery Machine Manual
2.8 S
ETTING
U
PPER
T
HREAD
2.8.1 Upper Thread Threading
The upper thread refers
to the thread that is seen on the
top of the embroidered item.
The upper threading track is
shown in Figure 2-8. An
upper
thread break typically refers to
when the current spool of thread
that is embroidering has broken.
Upper thread is also physically
located at the top of the machine
whereas the lower thread
(bobbin) is located towards the
bottom. Upper thread is the
common spool of thread used to
embroidery designs.
Video -
https://www.youtube.com/watc
h?v=DvGlU2_-yLo
Refer to Figure 2-9 to thread.
Step A – First complete
the section “Setting the threads”.
Step 1 – Insert the first
thread into the eyelet of the pretension knob. The pretension knob is the one at the very top of the
machine and is the first tension knob the thread passes through
Step 2 – Place the thread in between the 2 disks of the pretension knob going to the right.
Step 3 – Detach the top of the thread tube and place thread through U-Slot
Step 4/5/6 – For this step you will need the threading rod . The Threading Rod is a narrow piece
of plastic approximately 2 feet long about the width of a pencil tip that comes with the standard tool kit.
If you do not have a threading rod, you can also use a guitar string or anything similar. On the end of the
threading rod, there is a cut out notch. Insert the threading rod from the bottom of the threading tube,
notch end first. Pass the threading rod through the entire threading tube until the notched end comes
out. Attach the thread to the notch and (5) pull the other end of the threading rod back out of the
threading tube so that the thread is completely through the tube. (6) Attach both ends of the threading
tube back onto the machine.
Figure 2-8: Upper Threading Track