Butler 645-061, Руководство пользователя

Страница: 15 / 27

KEY
1. Water reservoir cover
2. Water reservoir
3. Filter funnel
4. Glass pot (with lid)
5. Hotplate (beneath glass pot)
6. Start/stop button (I/O)
7. Indicator light
PRIOR TO FIRST USE
• Read the safety instructions through
carefully.
• Ensure that the cord is fully extended.
• Clean the glass pot using normal
washing-up liquid or in a dish washer.
• To rinse the coffee maker through, pass a
potful of water through the machine
before using it for the first time.
USING THE COFFEE MAKER
• Pour fresh cold water into the glass pot
(4).
• Lift the cover (1) of the water reservoir,
and carefully pour the water from the
glass pot into the reservoir (2).
• Close the cover of the glass pot (4), and
place it on the hotplate (5).
• Place a filter (size 1 x 4) in the filter funnel
(3), and put coffee or tea in it.
• Switch on the coffee maker by pressing
the on/off button so that the button is
pressed down towards the letter "I". The
indicator light (7) will now come on and
the coffee maker starts.
• If you want to keep the coffee hot after it
has been made, you can place it on the
hotplate (5) and leave the coffee maker
on.
CLEANING
• Before cleaning, remove the plug from
the wall socket and allow the coffee
maker to cool down.
• The filter holder and glass pot can be
washed using normal washing-up liquid.
• The best way to clean the coffee maker
itself is to wipe it with a damp cloth using
hot water and a little washing-up liquid.
The coffee maker must not be
submerged in any form of liquid.
• Do not use any kind of strong or abrasive
cleaning agent on the coffee maker or
accessories. Never use a scouring
sponge or similar to clean the coffee
maker, as the surface may be damaged.
DESCALING
The lime content of ordinary tap water
means limescale may be deposited inside
the coffee maker. This limescale may be
loosened using acetic acid (NOT ordinary
vinegar) or descaler, available in
supermarkets, etc.
1. Mix 100 ml acetic acid with 300 ml cold
water, or follow the instructions on the
descaler packaging.
2. Pour the solution into the water reservoir
and switch the coffee maker on using the
I/O button.
3. Allow half of the solution to run through
the coffee maker, and then switch it off
for approximately 10 minutes.
15
2.
3.
4.
5.
1. 7.
6.
XQ696_IM 11/06/04 12:20 Side 15