Bustec ProDAQ 3020 USB 2.0 VXIbus Slot-0 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 62

background image

ProDAQ 3020 USB 2.0 VXIbus Slot-0 Interface User Manual

3020-XX-UM

Copyright, © 2003 Bustec Production Ltd.

Page 17 of 60

2.5 Configuring the ProDAQ 3020 for the VISA Library

The  VISA  library  uses  interface  names  and  numbers  to  access  available  hardware
interfaces.  In  order  to  enable  the  VISA  library  to  use  a  ProDAQ  3020  interface,  which  is
connected  to  a  host  PC  for  the  first  time,  a  valid  interface  name  and  number  must  be
assigned to this device. The assigned interface name and number will be stored internally
in the configuration for this ProDAQ 3020 interface together with its serial number and will
be used for this device whenever it is connected to this host.

To assign an interface name/number and configure the ProDAQ 3020, connect the USB
interface cable between one USB port of the host PC and the USB port on the ProDAQ
3020 front panel and turn on the VXI mainframe.

From the VXI

plug

&

play

program group created during the installation of the VISA library,

select “VISA Configuration Utility” (“Start”



“VXIPNP”



“VISA Configuration Utility”).

This will start the configuration tool for the VISA library and attached hardware interfaces.

Figure 10 - VISA Library Configuration Utility

To  add  a  new  interface,  select  “Add  Interfaces”.  A  new  dialog  “Available  Interfaces”  is
shown  with  a  list  of  unconfigured  devices  found  in  the  system.  ProDAQ  3020  interfaces
appear  as  interfaces  of

the type “VXI” together with a description containing the serial

number  of  the  device  (see  Figure  11,  ProDAQ  3020  Ser.  No.  3201003).  If  the  3020
detected  features  the  optional  on-board  GPIB  interface  (ProDAQ  3020-AB  and  ProDAQ
3020-BB  only),  the  GPIB  interface  will  appear  in  the  list  of  available  interfaces  as  a
separate interface of the type “GPIB”, again with a description containing the serial number
of the device (see Figure 11, ProDAQ 3020 Ser.No. 30201018).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
16
17
18
19
20
...
»

Содержание ProDAQ 3020 USB 2.0 VXIbus Slot-0































































Отзывы:

Нет отзывов

Похожие инструкции для ProDAQ 3020 USB 2.0 VXIbus Slot-0

Бренд: Landoll Страницы: 52

Бренд: JBSYSTEMS Light Страницы: 14

Бренд: Raymarine Страницы: 464

Бренд: 3M Страницы: 8

Бренд: ZOLL Страницы: 3

Бренд: GE Страницы: 802

Бренд: iET Страницы: 17

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

Бренд: Ofa Bamberg Страницы: 80

McDonnell & Miller PSE-800-M

Бренд: Xylem Страницы: 20

Бренд: RAM Страницы: 4

Бренд: Lightolier Страницы: 2

Бренд: Hedson Страницы: 32

Бренд: JLG Страницы: 165

Бренд: Labconco Страницы: 174

Бренд: Varan Motors Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды