BUSKRO BK731 Скачать руководство пользователя

Страница: 38 / 85

Chapter 4

User

Interface

Page 4-7

4.4 Keypad Position Menu

The

“Position”

button on the keypad provides the user with the ability to change the

number of labels per product and where they are positioned on the product. This includes

automatic symmetrical positioning of labels or manual placement.

4.4.1 Label Spacing Option

The Label Spacing function allows the spacing between each label to be set manually or

automatically. The automatic spacing allows the labels to be spaced equally. If the

manual option is selected, the user can key in the spacing between labels manually. In

order to set the label spacing to auto or manual:

1. If the keypad does not say “OFFLINE”, press the

<Online>

key.

2. Press

the

<Position>

button.

3. The display should read

“SPACING: AUTO”

“SPACING: MANUAL”

. If

not, press the Down key until it does.

4. Press

the

<+>

<->

key to change between the Auto and Manual settings.

5. If you wish to manually change the label position, go to

Section 4.4.4

6. Press

<Online>

to exit the Position menu.

Note

: If automatic label spacing is chosen, label position cannot be keyed in.

Buskro Ltd.

BK731 Labeler

Содержание BK731






















































































Результаты поиска

Содержание BK731

Отзывы:

Похожие инструкции для BK731

Бренды по названию

Популярные бренды

BUSKRO BK731, Руководство пользователя

Результаты поиска

Содержание BK731

Отзывы:

Похожие инструкции для BK731

Бренды по названию

Популярные бренды