background image

WARNING! 

It is highly recommended that installation is performed by 

an authorised technician.  Incorrect installation could result 

in the winch not operating correctly and could cause injury 

or even death. 

INSTALLATION GUIDE

1. If connected, disconnect the winch power leads from 

the battery. 
2. Utilising the provided mounting hardware, find a suitable 

location within 300mm from the vehicles battery to mount 

the winch isolation switch.
3. Route the winch power cable to the isolation switch. The 

existing winch power cable lug needs to be replaced with 

the M10 lug supplied. This provides the opportunity to cut 

your existing power cable to specific length of your 

vehicle’s installation.
4. On confirmation of the suitable cable length, cut the 

power cable and crimp on the new M10 lug provided.
5. Attach the main power cable from the winch to the 

isolation switch.
6. Attach the short 300mm cable from the isolation switch 

to the vehicle battery.
7. Using the cable ties provided, ensure all cables are 

secure and have no potential of rubbing on other vehicle 

components.  

Отзывы: