background image

INSTRUCTIONS

Remove debris from tyre tread or sidewall using 

the pair of pliers provided in the kit. Take care, 

as residual air will escape under pressure.

Apply lubricant to the spiral shaft of the reamer 

tool. This will help to probe the hole and 

temporarily seperate the steel belts.

Insert the reamer into the puncture hole and 

push in to clean out the hole. Reinflate tyre to 

help with insertion of cord.

Thread the repair cord through the eye of the 

insertion tool until equal parts are either side of 

the tool. Lubricant may be added to the tip to 

make insertion easier.

Firmly push the insertion tool and cord into the tyre. 

A small amount of the cord should be visible. 

(50-10mm only)

Remove the tool, by slowly pulling up on the 

handle. The cord should remain stationary in this 

process. Note: do not twist the handle. Trim the 

excess protruding cord with the blade provided.

Reinflate the tyre using a Bushranger compressor 

to the recommended tyre pressure and check for 

leaks.

Check the repair regularly and have the tyre 

professionally checked and repaired as soon as 

possible. Seals are only intended to be used as 

temporary repair.

1.

2.

3.

4.

5.

6.

7.

8.

1.

2.

3.

4.

5.

6.

Отзывы: