![background image](http://html.mh-extra.com/html/bushranger/mc-hts-2/mc-hts-2_owners-operators-manual_2835608011.webp)
_
10
_
General Cleaning and Tightening
The BUSHRANGER Multi-Cutter will provide maximum performance for many, many hours if it is main-
tained properly. Good maintenance includes regular checking of all fasteners for correct tightness, and
cleaning the entire machine.
WARNING
POTENTIAL HAZARD
・
When engine is running, attached tool and other parts are moving.
WHAT CAN HAPPEN
・
Contact with moving tool or other moving parts could cause serious personal injury or death.
HOW TO AVOID THE HAZARD
・
Always turn off your Multi-Cutter before you clean or perform any maintenance on it.
Storage
Please see your Multi-Cutter Power Unit Owner’s/Operator’s Manual.
1. Perform all regular maintenance procedures and any repairs.
2. Store the Multi-cutter in a dry place away from excessive heat, sparks or open flame.
Troubleshooting
Problem
Cause
Action
Engine will not start
・
STOP switch set to off position
・
Empty fuel tank
・
Primer bulb wasn’t pushed enough
・
Engine flooded
・
Move switch to on position
・
Fill fuel tank
・
Press primer bulb until fuel flows
through the fuel return line
・
Use warm engine starting procedure
Engine will not Idle
・
Idle speed set incorrectly
・
Set Idle speed
Engine lacks power or stalls
when cutting
・
Throttle wire has come loose
・
Dirty air filter
・
Tighten throttle wire
・
Clean or replace air filter
If further assistance is required, contact your local authorized BUSHRANGER service dealer.
Содержание MC-HTS-2
Страница 13: ...MEMO ...
Страница 14: ...MEMO ...
Страница 15: ...MEMO ...
Страница 16: ...P N 241979 01 GB 1909 IN 11 Sodium Street Narangba Qld 4504 ...