Bushranger BRU36v9401, Руководство оператора

Страница: 5 / 16

5
SAFETY RULES & PRECAUTIONS
Operation (continued)
• Do not allow hands or any other part of the body or clothing inside the feeding chamber, discharge chute, or near any
moving part .
• Keep proper balance and footing at all times. Do not overreach. Never stand at a higher level than the base of the
machine.
• Always stand clear of the discharge zone when operating this machine. Obtain ear protection and safety glasses. Wear
them at all times while operating the machine.
• If the machine should start making any unusual noise or vibration, immediately shut off the power source and allow
the machine to stop. Remove the battery pack from the machine and take the following steps before restarting and
operating the machine:
- inspect for damage;
- replace or repair any damaged parts;
- check for and tighten any loose parts.
• If the machine becomes clogged, shut-off the power source and remove the battery pack from the machine before
cleaning debris.
• Never operate the machine with defective guard sor shields, or without safety devices.
• Keep the power source clean of debris and other accumulations to prevent damage to the power source or possible fire.
• Do not transport this machine while the power source is running.
• Always disconnect the machine from the power supply (e .g.remove the battery pack from the machine);
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the machine.
• Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
Maintenance and Storage
• Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.
• Replace worn or damaged parts.
• Use only genuine replacement parts and accessories.
• Store the machine in a dry place out of the reach of children.
• When the machine is stopped for servicing, inspection, or storage, shut off the power source, disconnect the machine
from the supply and make sure that all moving parts have come to a complete stop. Allow the machine to cool before
making any inspections, adjustments, etc. Maintain the machine with care and keep it clean.
• Always allow the machine to cool before storing.