Bushranger BRU36v9401, Руководство оператора

Страница: 12 / 16

12
ASSEMBLY & OPERATION
WARNING
Battery tools are always in operating condition. Therefore, operation trigger switch should always be in the OFF (released)
position when not in use or carrying/moving the tool.
Operating The Blower
(Refer To Fig. 6, page 10)
• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a
pile.
• To reduce sound levels, limit the number of pieces of equipment used at any time.
• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces when water is
available.
• Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such
as gutters, screens, patios, grills, porches, and gardens.
• Watch out for children, pets, open windows and blow debris safely away.
• After using blowers or other equipment, CLEAN UP!
• Dispose of debris properly.
• Pressing the turbo button, the blower will be at max speed immediately, unpressing the turbo, the speed will be back to
normal. Refer to page 10, figure 7.
WARNING
When servicing use only original manufacturer’s replacement parts, accessories and attachments. Use of any other parts
may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum based products, penetrating oils, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy plastic.
WARNING
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or
modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING
To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any
maintenance.