| Wheelie Bin
| Wheelie Bin
Page 4
Page 5
Care and fitting guidelines
•
Ensure Wheelie Bin is not stored in direct sunlight or wet / humid environments.
•
Do not expose Wheelie Bin to any petroleum-based, acids or alkaline products.
•
Clean Wheelie Bin regularly with a non-abrasive sponge or similar in warm water and
pH neutral car washing liquids only. Allow to dry in the shade to preserve shine and
promote longevity.
•
Always ensure Wheelie Bin is dry prior to being stored.
•
Prior to strapping the “Wheelie Bin” to a rear mounted spare wheel, check that all
wheel nuts are tightened to the correct torque.
•
Do not reduce visibility of the licence plate in anyway.
•
Always check lid is completely buckled closed before driving.
•
Regularly check buckles and straps are secure when driving.
•
Check local laws and regulations before attaching any external components onto
your vehicle.
•
Confirm the spare wheel is suitable for mounting of this product (fully laden) with the
vehicle manufacturer and the manufacturer of any aftermarket wheel carrier installed
before using this product.
•
Always consider the additional stresses from the environment and application in
determining if the product can be used.
•
Avoid carrying sharp objects (including broken glass).
•
Avoid carrying harmful chemicals/oils.
•
Never carry hot materials .
The Bushranger Wheelie Bin is normally strapped to vehicles with a rear mounted spare wheel.
Adjustable pull-straps allow the “Wheelie Bin” to suit most vehicles.
Note:
For clarity
purposes
, some images included with these instructions are shown with the
wheel removed from the vehicle.
Care & Maintenance
Vehicle
Product
Before First Use
WARNING
•
Evidence of heavy impacts.
•
Cuts and abrasions.
•
Badly worn
•
Seam damage
•
Deformation
Position the Wheelie Bin over the wheel and the horizontal bracing strap should be snug
across the top edge of the tyre.
The harness straps are in a vertical position.
Wheel mounting bracket
Harness straps
View from behind the wheel
Arrange the Harness (webbing straps) so that the straps go behind the wheel.
There are several methods in which the “Wheelie Bin” may be strapped to a vehicles spare
wheel dependent upon the users’ preference.
Damage may include:
Step 1
Step 2
Method 1: Vertical (Classic) method:
Fitting Guidelines
Prior to using the Wheelie Bin or any of its components inspect for damage.
Safety & Inspection
Содержание 61X08B
Страница 1: ...WHEELIE BIN 61X08B ...