background image

DRIVE CONTROL BAR - 

used to engage the gearbox 

and propel the lawn mower forward.

THROTTLE CONTROL - 

used for starting the engine 

and allows you to select either fast or slow 

 

engine speed.

MULCHING PLUG - 

Allows the grass to be cut multiple 

times under the cutting deck until small enough to be 

left on the lawn.

HOW TO USE YOUR LAWN MOWER 

ENGINE SPEED

A throttle located on the side of the upper handle

controls the engine speed. Fast position is for

normal cutting, trimming and better grass bagging.

Slow position is for light cutting, trimming and

 

fuel economy.

TO OPERATE DRIVE SYSTEM (See Fig.4)

To start forward motion, push drive control bar forward 

to handle.

To stop forward motion, release drive control bar.

IMPORTANT:

 

ALWAYS KEEP DRIVE CONTROL 

FULLY ENGAGED AGAINST HANDLE WHEN IN USE

ADJUSTING THE DRIVE SPEED (See fig.5)

(For speed adjustable model).

Note: 

The speed may only be adjusted when the 

engine is running in order to avoid damage!

GEAR SHIFT LEVER

1. 

Start engine.

2. 

Select the speed/gear required - 1st slow, 2nd 

medium, 3rd fast.

3. 

For good mowing performance from your mower 

the throttle control lever should be set to high.

4. 

Before pushing the drive lever to engage the gear 

box. Push the mower forward manually while slowly 

pushing the drive lever towards the top handle. 

Mower will start to move forward.

5. 

Be sure the gear shift lever is engaged in one of 

the three detent positions.

NOTE:

 Get used to how your mower will engage and 

drive forward, firstly start with the throttle lever set to 

low or medium.

• 

1st (slow) - Mowing long/thick grass.

 

•  2nd (medium) - Intermediate mowing speed.

 

•  3rd (fast) - Max. Self propelled mowing.

         WARNING:

 The operation of any lawn mower  

         can result in foreign objects thrown into the 

eyes, which can result in severe eye damage. Always 

wear safety glasses or eye shields while operating 

your lawn mower or performing any adjustments or 

repairs. We recommend a wide vision safety mask 

over spectacles or standard safety glasses.

FIG. 4

     STOP 

            START                  FORWARD

FIG. 5

1st

(SLOW)

2nd

(MEDIUM)

3RD

(FAST)

THROTTLE LEVER

CHOKE

GEARSHIFT 

LEVER

Содержание 53AH6IMSP





















Отзывы: