![background image](http://html.mh-extra.com/html/bushranger/48al7m/48al7m_operators-manual_2835592009.webp)
9
• You can now install your catcher. (See attach
catcher)
• To convert back to mulching, remove catcher and
fit mulcher plug.
TO ATTACH GRASS CATCHER
2.
The grass catcher is secured to the lawn mower
housing when the rear flap is lowered onto the grass
catcher frame.
TO EMPTY GRASS CATCHER
1.
Lift up on grass catcher using the frame handle.
2.
Remove grass catcher with clippings from under
lawn mower handle.
3.
Empty clippings from bag using both frame handle
and bag handle.
These symbols may appear on your lawnmower or in literature supplied with the product. Learn and understand their meaning.
THROTTLE CONTROL -
used for starting the engine
and allows you to select either fast or slow
engine speed.
MULCHING PLUG -
Allows the grass to be cut multiple
times under the cutting deck until small enough to be left
on lawn.
STARTER HANDLE -
used for starting the engine.
TO ADJUST CUTTING HEIGHT
• Never adjust the cutting height with the motor
still running.
• The mower is adjusted to one cutting height
upon delivery.
• You can set the desired cutting height with the
adjustment lever to fit different terrain. Pull the lever
out of the catch, move to the desired position and let
it fall back into the catch.
WARNING
• The lawnmower can only be used on level lawns if
the lowest cutting height is being used.
WARNING:
The operation of any lawn
mower can result in foreign objects
thrown into the eyes, which can result in severe
eye damage. Always wear safety glasses or
eye shields while operating your lawn mower
or performing any adjustments or repairs. We
recommend a wide vision safety mask over
spectacles or standard safety glasses.
CAUTION:
Do not run lawn mower
without grass catcher in place. Never
attempt to operate the lawn mower with the rear
door flap removed or propped open.
HOW TO USE YOUR
LAWN MOWER
ENGINE SPEED
A throttle lever located
on the side of the upper
handle controls the engine
speed. Fast position is for
normal cutting, trimming
and better grass bagging.
Slow position is for light
cutting, trimming and fuel
economy.
Your lawn mower was
shipped ready to be
used as a mulcher. To
convert to catching: -
• Open rear flap and
remove mulcher
plug. Store mulcher
plug in a safe place.
TO CONVERT MOWER
1.
Lift the rear
flap of the lawn
mower and
place the grass
catcher frame
side hooks into
the slots of the
lower handle
brackets.
CAUTION:
During operation of emptying
clippings from grass catcher, please
wear protective gloves to prevent environmental
influence on your skin.
NOTE:
When
emptying the
grass catcher,
do not drag the
bag over the
ground as it will
cause
unnecessary wear.
MULCHER PLUG
CENTRAL ADJUSTER ON RIGHT SIDE
LOWER
WHEELS FOR
HIGH CUT
RAISE WHEELS
FOR LOW CUT
WHEEL ADJUSTER
LEVER
FIG. 4
LOWER BRACKET
SLOTS
CATCHER
FRAME HOOK
FIG. 5
GRASS
CATCHER
FRAME HANDLE
BAG
HANDLE
FIG. 6
THROTTLE
LEVER
CHOKE
Содержание 48AL7M
Страница 1: ...1 LAWN MOWER 48AL7M OPERATOR S MANUAL ...
Страница 19: ...19 NOTES ...