12
• Follow the maintenance schedule in this manual
periodically.
BEFORE EACH USE
1.
Check engine oil level.
2.
Check for loose fasteners.
LUBRICATION
Keep unit well lubricated.
LAWN MOWER
Always observe safety rules when performing
any maintenance.
TYRE
• Keep tyres free of fuel, oil, or insect control
chemicals which can harm rubber.
• Avoid stumps, stones, deep ruts, sharp objects and
other hazards that may cause tyre damage.
BLADE CARE
• Contact your local Bushranger™ dealer for mower
blade replacement.
•
TO SHARPEN BLADE
We do not recommend sharpening the blade.
• Once a year, replace the spark plug, clean or
replace air filter element and check blade for wear.
A new spark plug and clean/new air filter element
assures proper air-fuel mixture and helps your
engine run better and last longer.
• Follow the maintenance schedule in this manual
periodically.
GRASS CATCHER
• The grass catcher may be hosed with water, but
must be dry when used.
• Check your grass catcher often for damage or
deterioration. Through normal use it will wear
if catcher needs replacing, replace only with a
manufacturer approved replacement catcher. Give
the lawn mower model number when ordering
ENGINE
Read the Maintenance section of your engine manual.
WARNING:
Make sure all operations are
performed while the engine is stopped.
LUBRICATION
Use only high quality detergent oil rated with API
service classification SF-SJ. Select the oil’s SAE
viscosity grade according to your expected operating
temperature.
NOTE:
Although multi-viscosity oils (5W30,10W30
etc.) improve starting in cold weather, these multi-
viscosity oils will result in increased oil consumption
when used above 32 F. Check your engine oil level
more frequently to avoid possible engine damage from
running low on oil.
Change the oil after every 25 hours of operation or
at least once a year if the lawn mower is not used for
25 hours in one year.
Check the crankcase oil level before starting the
engine and after each five (5) hours of continuous
use. Tighten oil plug securely each time you check
the oil level.
TO CHANGE ENGINE OIL
NOTE:
Before tipping lawn mower to drain oil, drain
fuel tank by running engine until fuel tank is empty.
1.
Disconnect spark plug wire from spark plug and
place wire where it cannot come in contact with
spark plug.
2.
Remove engine oil cap; lay aside on a clean surface.
3.
Tip lawn mower on its side as shown and drain oil
into a suitable container. Rock lawn mower back and
forth to remove any oil trapped inside of engine.
4.
Return lawn mower to upright position. Wipe off any
spilled oil from lawn mower or side of engine.
5.
Fill engine with oil. See “ADD OIL” in the Operation
section of this manual.
6.
Reconnect spark plug wire to spark plug.
CAUTION:
Disconnect spark plug wire
from spark plug and place wire where it
cannot come in contact with spark plug.
Содержание 48AL7M
Страница 1: ...1 LAWN MOWER 48AL7M OPERATOR S MANUAL ...
Страница 19: ...19 NOTES ...