Bushnell Trailscout 119700, Руководство пользователя

Страница: 11 / 22

11
Setup Guide (cont.)
Password
None
Day Time
07 -- 18
(5) SET DAY TIME:
(NOTE: This setting applies to use of Trail Scout in DAY or NIGHT
mode only. 24Hr mode will ignore DAY TIME setting.)
When the LCD shows (Day Time), press ENTER key to set the DAY TIME range.
The LCD will show and underscore under the first 2 digits in the DAY TIME
mode. Press the up or down keys to set time of 24 hour clock for the specific DAY
TIME start time desired. Press ENTER to set the DAY TIME start time.
Then, underscore will move to the second 2 digits in the DAY TIME mode. Press
the up or down keys to set time of 24 hour clock for the specific DAY TIME end time
desired. Press ENTER to set the DAY TIME end time.
Now your DAY TIME is defined.
Example: 07—18 would allow camera to image between 7am to 6pm.
If you do not want to set a password when the LCD shows (PW YES) , you
can press the U/D button to select No, After pressing the ENTER, the LCD
display shows (PW NO), and no password will be set.
When you are finished with SETUP, change K1 to the ON (UP) position
and the unit will be operating after a 2 minute delay.
c) Power OFF: Set K1 to “Off”, the Trail Scout will be OFF.