USER INPUT SWITCHES
There are six switches on the Speedster, five of which are on the back display panel and one is a “trigger”
position switch. The switches are labeled as:
1.
Power On/Off
2.
Activate Radar
a.
Trigger position switch
b.
Dual mode function
i)
Activates radar in speed measurement mode
3.
Enter
4.
Up Arrow
5.
Down Arrow
6.
Page
General Switch Operation
1.
Power On/Off
a.
Is always active, regardless of which screen or mode the unit is in
b.
Press to turn the unit on and off
c.
Is an immediate power off, all DSP and radar activity ceases immediately
i)
No speed or statistical information saved in FLASH before powering off
d. Unit will always return to the last MODE (Speed Only OR Speed + Baseball Stats) and UNITS
(MPH OR KPH) setting used each time the device is turned –on.
2.
Activate Radar
a.
Speed Measurement Mode
i)
Press and hold to turn on the transmitter and perform speed processing
(1)
Power will be applied to microwave circuitry
(2)
AD1881 will be taken from powerdown to speed processing mode of operation
(3)
Radar Active Icon will be displayed at top right corner of LCD
ii)
Release to turn off the transmitter and to lock display with current speed displayed
(1)
Microwave circuitry power will be turned off
(2)
AD1881 will be taken from active to powerdown mode of operation
3.
Enter – all modes
a.
When measuring speeds in Screen Three and/or Screen Five
i)
Used to accept current locked display speed into statistical update
ii)
Also saves current displayed speed only or player stats information to memory
b.
When editing setup in Screen Two
i)
Used to accept edit choices during setup/configuration operations
ii)
Does
NOT
update setup information in memory
4.
Up Arrow
a.
Scroll mode
i)
Used to change current parameter edit field up one position in setup screens
b.
Edit mode
i)
Used to increment/change selected parameter when editing a setup field
c.
Stats mode
i)
Used to increment
BALL
count when in baseball stats mode
5.
Down Arrow
a.
Scroll mode
i)
Used to change current parameter edit field down one position in setup screens
