BUSHNELL
SPEEDSTER
OPERATORS MANUAL
REGULATORY STATEMENTS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Your Bushnell® Speedster™ is a precision instrument designed to provide many years of enjoyment. This
booklet will help you achieve optimum performance by explaining its adjustments and features as well as
how to care for this precise speed and statistic measuring instrument. To ensure optimal performance and
longevity, please read these instructions before using your Bushnell Speedster.
INTRODUCTION
Your Bushnell Speedster uses digital technology and DSP (Digital Signal Processing) to provide
instantaneous and accurate speed measurements to +/- One Mile Per Hour (MPH) accuracy. The Bushnell
Speedster is a handy, multi-functional speed gun for all kinds of sports enthusiasts. Track everything from
pitching speeds to cars at the racetrack. The Bushnell Speedster measures the speed of a baseball at 10-
110 MPH from 60 feet away from the ball, and the speed of a racecar from 10-200 MPH at 650 feet away.
Unlike any other speed gun available, the Speedster allows you to keep statistics for baseball and softball,
and provides last and average speeds for any type of object measured.
BATTERY INSTALLATION
Your Bushnell Speedster operates on six AA batteries. To install, remove the battery cover (A) by
depressing both sides of the handle bottom. Remove the battery cartridge (B) and install the batteries so
that the positive (+) and negative (-) terminals of the batteries match the markings inside the battery
cartridge. Re-insert the battery cartridge with batteries in place and then place battery cover back onto the
handle.
GENERAL OPERATION
Your Bushnell Speedster operates on six AA batteries. Make sure they have been installed according to the
instructions listed in the battery installation section.
A QUICK START LESSON
Your Bushnell Speedster can be turned on by pressing the POWER button on the right side of the user
panel below the LCD display (See fig. 1 ). This button will turn on the unit or turn it off at any time during
the operation of the Speedster.
Your Bushnell Speedster can be configured for many different modes of operation. These will be described
in detail in later sections of this manual.
