5
DUAL DISPLAY
TECHNOLOGY
GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Pro X2, depress the power button once to activate the display. Place the aiming circle
(located in the center of the field of view) upon a target at least 5 yards away, depress and hold the power button down
until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming circle
indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The
crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is no
longer being transmitted).
Note: Once activated, the display will remain active and display the last distance measurement for 7 seconds. You can depress the power
button again at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long
periods of time with magnified lenses. The maximum time the laser is transmitted (fired) is 7 seconds. To re-fire, press the button down
again.
ADJUSTING THE EYEPIECE
The Pro X2 is equipped with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows
you to focus the display relative to the image. Simply rotate the eyepiece until the display
is in focus.
DUAL DISPLAY (SELECTING RED OR BLACK DISPLAY)
The Pro X2 features Dual Display Technology, which lets you easily toggle between a
bright red display featuring VDT (Vivid Display Technology) or a crisp black display,
based on lighting conditions or your preference. To toggle between red and black displays,
briefly press and release the round “B” logo plate on the left side of the unit.
