Phone*800-538-1780
Fax*256-549-5502
Page 8
OPERATING INSTRUCTIONS
FOR SKID STEER LOADERS
D.
NEVER raise the back of the cutter more than 2 feet off the
ground. NEVER expose yourself or anyone else to the rotating
blades. If you can see the rotating blades of the cutter when
operating the unit, the back of the cutter is raised too high.
E.
When cutting large brush with BM, MX and TAZ models,
operate the cutter in the following manner: Roll the front of
the cutter up 1 or 2 feet. Do not lift the back of the cutter, just
use the roll function to rotate the front up. Slowly drive into the
tree, and use the hydraulic tilt (roll) hydraulics to bend or push
the tree over. As you bend the tree, the blades will cut the tree
off. The tree can now be mulched by rotating the front up,
driving forward several feet, roll the front down onto the tree
and back drag.
F.
When cutting large brush with a TS or SL models, simply cut
the tree at the base with the front of the cutter slightly lower
than the back, then drive over the brush to mulch.
Содержание BM501
