Bush WO378, Инструкция по эксплуатации

Страница: 27 / 52

Using your CD Micro HiFi
Let’s get started
Using your CD Micro Hi-Fi
27
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021 .
Tuning to an FM station
In FM mode:
1.
Press and hold the button to scan up the frequency band. Press and hold the
button to scan down the frequency band. Your HiFi will search for the next available
station and then stop on that station.
2. Press and release the and buttons to fine tune each frequency in 0.05MHz
steps, if necessary.
Note: If reception is still poor check that the telescopic aerial is fully extended or try
moving the HiFi to another location.
Changing the scan setting
In FM mode:
1. Press and hold the Menu button. Scan setting will be displayed and highlighted. Press
the rotary navigation control to Select. There are now two different options to choose
from and the current setting will have a tick next to it.
• Strong Stations Only
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for may
be missed using this option.
• All Stations
The scan will stop for every station it receives, even if the signal strength is poor.
2.
Use the rotary navigation control to move to and choose from the two options
available. Press the rotary navigation control to confirm.
3. Press and release the Menu button until you exit from the Menu.