Bush WO378, Инструкция по эксплуатации

Страница: 17 / 52

Getting to know your CD Micro HiFi
You’ll be up and running in no time
Getting to know your CD Micro Hi-Fi
17
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021 .
Power connection
1. Fully extend the telescopic radio aerial on the back of the HiFi to receive the best
possible radio reception and sound quality.
2.
Plug the mains power plug into the mains power wall socket and switch on. Slide the
ON/OFF switch on the back of the HiFi to ON.
3. The BUSH logo is displayed followed by the Language display options available with
‘English’ highlighted. Use the rotary navigation control to scroll to the display language
you would like and then press the navigation control to Select.
4. Your HiFi will go to Standby mode with a clock display.
Initial set-up
Press and release the Standby button on the front of your HiFi System. The first time you
switch on your HiFi or if the station list is empty, your HiFi will automatically begin to scan
for DAB radio stations. A progress bar will show the progress of the scan and the number
of stations found during the scan will also be displayed.
When the scan is complete your HiFi will select the first available station and begin to play.
Stations are listed in numerical and then alphabetical order by default.
Change the mode
Press and release the Mode button to change between DAB radio, FM radio, Bluetooth,
CD and Aux in modes. Please check the display, which will confirm the mode.
Adjusting the volume
Use the Vol- and Vol+ buttons to adjust the volume, there are 32 volume levels available.
Check the display, which will confirm the volume setting.