Bush WMSAE1012EB, Инструкция по эксплуатации

Страница: 22 / 48

Functions
Simple everyday use
Functions 22
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271 .
Child Lock
To avoid programme flow from being affected if
programme buttons are pressed or programme button
is turned when performing a washing operation in your
machine, a child lock is available.
Child lock will be activated when both auxiliary
functions 3 and 4 are pressed at the same time for more
than 3 seconds. You can see the auxiliary function leds
on the display when activated.
If any button while child lock is active, the Additional
Function Leds will blink on the display.
If while the child lock is engaged and any programme
is running, the programme dial is switched to the
CANCEL position and another programme is selected,
the programme previously selected continues from
where it left off.
To deactivate the child lock, press and hold the same
buttons used to activate it for 3 seconds, and the ‘CL’
symbol on the display will turn off.
Cancelling Programme
If you want to cancel any programme running:
1- Switch the programme dial to the “CANCEL” position.
2- Your machine will stop the washing operation and
the programme will be cancelled.
3- To get rid of the water accumulated in the machine
switch the programme dial to any programme.
4- Your machine will perform the necessary discharge
operation and cancel the programme.
5- You can run your machine by selecting a new
programme.
Finishing Programme
Your machine will stop by itself as soon as the
programme you have selected finishes.
- “End” led will blink on the display panel.
- You can open the machine’s door and remove the
laundry.
- Leave the door of your machine open to allow the
inner part of your machine to dry after removing your
laundries.
- Switch the programme dial to CANCEL position.
- Unplug your machine.
- Turn the water tap off.