Bush NE-8270, Инструкция по эксплуатации

Страница: 6 / 8

9 10
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD CARD.
2. Press the MODE button on the main unit (or remote control) to select the USB or CARD
mode. The main unit will automatically read the total number of the folders and tracks at
the same time. Then playback starts with the first track. The display shows the current track
number and its elapsed time.
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. Press the SKIP/TUNE SEARCH(UP or DOWN) button to select current track in desired folder.
4. If the MP3 and WMA are written in "ID3".
a. During the unit in the MP3 or WMA playing. Press the ID3/MONO/ST. button once. The
display will show a "ID3 ON", and then it will automatically search more than 64 letters for
"TITLE NAME", "ARTIST NAME" or "ALBUM NAME" which move from the right corner to the
left corner on the display continuously.
b. Press the ID3/MONO/ST. button once again. The display will show a "ID3 OFF", and then the
main unit will play normally.
Note:
1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/SDHC cards (up-to 32GB memory capacity
for SDHC). It cannot access (or, need longer time to access) those devices with big memory
capacity.
3. It can support USB version 1.1 and 2.0.
4. The main unit does not support the WMA file which is protected “DRM FILE”.
Playing The Entire flash disc
1. To interrupt playback, press the PLAY/PAUSE button. The time elapsed indicator will flash.
2. To resume playback, press the PLAY/PAUSE button again.
3. To stop playback, press the STOP button.
Note : In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY
mode to avoid the main unit and USB DEVICE or SD CARD were damaged.
REPEAT PLAY(on the remote control)
- CD
1. Press the REPEAT button once , REPEAT is displayed. The main unit will play the current track
repeatedly.
2. Press the REPEAT button twice, REPEAT ALL is displayed. The main unit will play all tracks
repeatedly.
3. Press the REPEAT button thrice, REPEAT function will be off.
- MP3/WMA
1. Press the REPEAT button once , then REPEAT is displayed. It will play the current track
repeatedly.
2. Press the REPEAT button twice, REPEAT ALL is displayed. It will play all tracks repeatedly.
3. Press the REPEAT button thrice, then REPEAT ALBUM is displayed. It will play repeatedly the
current album.
4. Press the REPEAT button four times, then REPEAT function will be off.
RANDOM PLAY(on the remote control)
1. Press the RANDOM button once , and then RANDOM is displayed.
2. Press the RANDOM button once again, and then resume to normally play.
INTRO PLAY(on the remote control)
1. Press the INTRO button once, and then INTRO is displayed. The main unit will play the first
10 seconds of each track.
2. Press the INTRO button twice, and then resume to normal play.
PROGRAM MODE
User can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/
SD CARD mode in any desired order. Program mode is activated while in stop mode.
1. How to play the program
- CD
1) Press the MEMORY button, shift to PROGRAM mode.(F1)
2) Press the SKIP/TUNER SEARCH(UP or DOWN) button, the track number will be changed.
3) Press the MEMORY button to confirm the track number.
- MP3/WMA/USB/SD CARD
1) Press the MEMORY button, shift to PROGRAM mode. The album number is flashing. (F2)
2) Press the PRESET/FOLDER (UP or DOWN) button, the album number will be changed.
3) Press the MEMORY button , the track number is flashing.(F3)
4) Press the SKIP/TUNER SEARCH button, the track number will be changed.
5) Press the MEMORY button to confirm the track number.
2. PROGRAM PLAY
Press the PLAY/PAUSE button on the unit (or remote control), it will be play starting with the first
track of the program. When all tracks have been played, the unit display will show the number of
tracks and the playing time of the CD/MP3/WMA tracks.
NE-8270 Manual.pdf 6 2015/6/10 14:04:58