7
8
RADIO OPERATION
1. Press the MODE button on the main unit (or remote control) to select the TUNER mode that
to select the FM operation.
2. Select the desired frequency with the SKIP/TUNE SEARCH(UP or DOWN) button on the main
unit (or remote control).
Mono/Stereo Select
This unit can receive the FM mode only.
1. When you want to select FM stereo station, press the ID3/MONO/ST. button on the remote
control once only. The " " indicator will appear on the display that the reception is at its best.
2. When you press the ID3/MONO/ST. button once again, the FM STEREO indicator will turn off
& switch to MONO FM status.
Automatic Tuning
1. Press the SKIP/TUNE SEARCH (UP or DOWN) button for a few seconds, then release the
button. The tuner will automatically search the first station of sufficient signal strength.
2. Repeat above procedure if you wish to select another station.
Programming preset stations
You can also preset stations of your choice and store up to 30 FM stations in its memory.
1. Tune to the required station.
2. Press the MEMORY button.
3. Press the PRESET/FOLDER (UP or DOWN) button for your desired station number.
4. Press the MEMORY button again to confirm your selection.
5. To program more stations into memory, repeat the above steps 2 to 4.
6. To change the stored preset stations, repeat the above steps 2 to 4.
Notes:
1. Storing a new station into a preset location will erase the previously stored station in that
location.
2. Power off will not erase the memory of preset stations. Perform the stations presetting
procedures again to store the stations.
3. During the unit in STANDBY mode, press and hold the PLAY/PAUSE button to erase all
preset memory.
Selecting the Preset Stations
1. Press the PRESET/FOLDER (UP or DOWN) button to select the desired preset station number.
2. The numeric location of that preset station is displayed along with the corresponding
frequency.
FM Antenna
Extend the FM antenna for better FM reception.
CD/MP3/WMA OPERATION
Listening To Compact Disc (CD/MP3/WMA)
1. Press the MODE button on the unit to select the CD mode.
2. Press the CD OPEN/CLOSE button on the main unit (or remote control), and then the CD
door will open automatically.
3. Insert the CD/MP3 disc into the CD compartment, press the OPEN/CLOSE button again to
close the CD door. The main unit will read the CD/MP3 disc automatically.
NOTE:
(1) This unit can play CD, CD-R, CD-RW, MP3 and WMA discs.
(2) It can read " 8 cm " and " Multi Section " MP3 DISC.
(3) The "Playback Transfer Rate" in MP3 and WMA. (a). In MP3, transfer bit rate : 8 - 256 kbps. (b).
In WMA, transfer bit rate : 8 - 192kbps.
(4) The "Max Readable 99 folders and 999 tracks".
(5) If no disc or can`t read TOC, NO DISC will be displayed.
Playing The Entire CD/MP3/WMA
- CD
1. Insert the CD disc into the CD compartment, the main unit will automatically read the total
number of the folders and tracks at the same time. Then the unit will play the first track of the
CD disc automatically.
2. Press the PLAY/PAUSE button once again, the time elapsed indicator will flash.
3. Press SKIP/TUNE SEARCH(UP or DOWN) button once to change Track NO., press and hold
the SKIP/TUNE SEARCH (UP or DOWN) button once to skip fast forward or backward of each
song.
4. To resume playback, press the PLAY/PAUSE button once more again.
5. To stop playback, press the STOP button once on the unit (or remote control).
- MP3/WMA
1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically read the
total number of the folders and tracks at the same time. Then the unit will play the first track
of the MP3/WMA disc automatically.
2. Press the PLAY/PAUSE button once again, the time elapsed indicator will flash.
3. To change Track NO., Press SKIP/TUNE SEARCH(UP or DOWN) button once. Press and hold
the SKIP/TUNE SEARCH (UP or DOWN) button once to skip fast forward or backward of each
song.
4. To resume playback, press the PLAY/PAUSE button once more again.
5. To change the ALBUM NO., press the PRESET/FOLDER (UP or DOWN) button once.
6. To stop playback, press the STOP button once on the unit (or remote control).
Note:
If the main unit is not working properly, disconnect the power source and then reconnect
it again
ID3 OPERATION
During in the MP3/WMA mode
1. Press the ID3/MONO/ST. button once to open the ID3 function.
2. If the MP3/WMA file is written “ID3”, it will automatically search the information of
“TITLE NAME”, “ARTIST NAME” and “ALBUM NAME” indicated on the display .
3. Press the ID3/MONO/ST. button again. Then the unit will resume to play normally.
NE-8270 Manual.pdf 5 2015/6/10 14:04:58
Содержание NE-8270
Страница 1: ...NE 8270 Manual pdf 1 2015 6 10 14 04 56 ...
