Bush MC004DVD, Инструкция по эксплуатации

Страница: 5 / 16

SPEAKERS IMPEDANCE
AUDIO VIDEO OUTPUT
COAXIAL VIDEO Y
S-VIDEO Pb/Cb
IN OUT
Pr/Cr
100-240V~
50/60H
Z
4
MODEL:
POWER :
POWERC ONSUMPTION: MC004DVD
100-240V~ 50/60Hz
45W
BUSH WARRANTY:
1800 509 394 Australia
0800 450 259 New Zealand
SERIALN O.:
4 4
L
R
FRONT AND
BACK PANELS
Back Panel Functions
8. ANTENNA
Use to connect the provided indoor FM
antennas.
9. 100-240V~ 50/60H
Z
Front Panel Functions
6. NEXT
While in the DVD mode, you may press this
button for the next track.
2. VOLUME
Use this button to control the unit's volume. It
controls 2 channels simultaneously.
3. OPEN/CLOSE
Use this button to open and close the disc tray
while in DVD mode.
5. PREV
While in the DVD mode, you may press this
button for previous track.
1.HEADPHONE JACK 7. INPUT SIGNAL SOURCE
Use this button to select the proper input signal
source. (Note: The selected input will correspond to
the selected input terminal on the rear panel.)
8. USB CONNECT
To connect a USB memory device
9. POWER
FRONT AND
BACK PANELS
PLAY /
Use this button to begin play function while in
DVD mode.
Use this button to pause play function while in
DVD mode.
PAUSE
4.
2. AUX INPUT
Use to connect input for auxiliary music source.
3. LINE OUT
7. S-VIDEO OUTPUT
1. FRONT/MAIN
Use to connect the four terminals of the left
and right front or main speakers.
4. COAXIAL DIGITAL AUDIO OUTPUT
6. VIDEO OUTPUT
5. Component Videos Output(Y,Cr/Pr,Cb/Pb)
9
1 2 3 4 5 6 7
8
3
1
2
4
5 6 7
9
8
6 7
Use to connect headphone to the unit.
Before plugging the power cord into the AC
outlet, check to make sure all of the connections
have been properly completed.
When they have been, carefully plug power cord
into the power outlet.
Press the POWER button on the front panel to
power the unit. The display panel will light.
When the unit is initially powered, a brief surge
of electricity may cause interference with other
electronic equipment on the same circuit. If this
occurs, connect the unit to an outlet on a different
circuit.
Use to connect the analog 2 channel audio output.
Use to connect the digital audio output.
Use to connect the component videos output.
Use to connect the s-video output.
Use to connect the composite video output.
This product will work under 100-240V voltage.
Frequency is 50/60H
Z.