P.08
BUSH
| HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105
G CH +: Press to go to the next higher channel. In Menu mode, functions
as the up arrow.
H CH -: Press to go to the next lower channel. In Menu mode, functions as
the down arrow.
I Power Button: Use this button to switch your LCD TV on/off.
J Common Interface Slot: Function when PC Card or ExpressCard is in
COMMON INTERFACE slot of the set. Please refer to your plug-in card
manual for detail information.
K / L AV input: connect the VIDEO recorders or DVD players with stan-
dard composite output and audio output signal.
M S-video Input: Connect the video for a S-Video device to this jack, and
compatible with composite/audio input.
N USB Input: This TV set can support Multi media input for .MP3 and
.JPEG file.
O Headphone Output: Connect to headphones (32Ω).
P HDMI Input: High Definition Multimedia Interface. Connect to devices
with digital signals and can be used with PC or HDTV video signals.
Q VGA Input: Connect to VGA analog signals sources.
R Component Input: The YPbPr video signal can be used if connecting
through the component video port. For example Progressive Scan DVD
players, Hiscale HDTV Decoders, and satellite receivers, obtain video
with maximum resolution using YPbPr and L/R audio signals.
S SPDIF: SPDIF is highly recommended for high quality digital sound
output.
T Antenna Input: Connects to TV RF signals (antenna/CATV).
U SCART: The left one is Full SCART with transmits RGB,S-Video and
CVBS in and CVBS tuner out,the right one is half SCART which trans-
mits S-Video or CVBS in and CVBS monitor out.
V Power Connector: Connect the power cord into the AC IN socket found
at the back of the TV.
W PC Audio Input: PC audio supports 3.5mm Jack.
X HDMI Input: High Definition Multimedia Interface. Connect to devices
with digital signals and can be used with PC or HDTV video signals.